3M™ Trizact™ Films - A Cleaner, Long Lasting
Abrasive System for Glass Scratch Repair
Starter and Professional Kits are Both Easy to Use
C.R. Laurence introduced 3M™ Trizact™ Abrasive
Film to the glass industry. This material uses natural abrasive formed in
the shape of small pyramids, and provides uniform layers of abrasive throughout
the pyramid. As abrasive particles are exposed and used, they fall down and are
flushed away between the pyramids
Diameter: 3 in (76.2 mm)
Minimum Order: 1 Each
This easy-to-use system uses five grades to go from a fine ground finish on
glass to absolutely clear! It is perfect for scratch removal, edge finishing and
a variety of other applications. No more messy slurries and contamination
problems!
The potential for this material in your glass fabrication process is amazing!
For a small investment, you can purchase equipment and supplies to remove
scratches in flat and curved glass, and to create your own finished products,
including "high polish" work.
3M™ Trizact™ will remove light or deep scratches, scuffs, wiper marks, and
stains on a variety of glass surfaces. Makes an old windshield or table top look
like new again!
3M™ Trizact™ should always be used wet, with plain water. Polish requires using
each grade long enough to remove all scratches from the previous grade. If this
is not done, small defects will remain in the finished product. When using "high
polish clear" (cerium), work surface must be flushed with water between stages
to remove loose abrasive.