Requires Cutting Instructions.
Call toll free for shipping
quote. 216-663-9830
The Most Popular Retrofit Storm Window System
Better Than Magnetic, Sturdier Than Vinyl
CRL-Sash Universal Storm Window Frame
is the quality made, all-in-one glass framing material for the fabrication of
secure, high-performance storm window and door panels. The frame accepts single
or double strength glass or acrylic up to 1/8 inch (3 millimeters) thick, which
makes it perfect for interior or exterior recessed or surface mounted panels.
Pre-installed vinyl gasket holds the glass or acrylic, eliminating the need for
messy adhesives used with most other types of storm window frames. Built-in pile
weatherstripping helps eliminate air infiltration between the secured panel and
the window frame. A roll-formed aluminum body gives the frame rigidity while
allowing the panel to remain lightweight enough to install and remove
seasonally.
Color: White
Length: 12 ft-2in (3.7 m)
Minimum Order: 1 Stock Length
Additional Product Information:
Two Ways to Fabricate
Miter Cut Fabrication
Miter cut fabrication is accomplished by miter cutting the frame to the desired
width and height. Next insert Cat. No. 1795 Corners and wrap the frame around
the glass or acrylic panel. Then use Cat. No. S1936 Tool to crimp the frame onto
the dimples in the corners to provide a tight fit.
Square Cut Fabrication
Square cut fabrication is accomplished by simply square cutting the frame 1-7/16
inches (36.5 millimeters) less than the desired width and height of the frame.
Next insert the Square Sash Corners, wrap the frame around the glass or acrylic
panel and the fabrication is complete.